Lessons learned: TV on fire onboard ferry

The incident

A small fire broke out behind a passenger information display screen onboard a ferry.

An of-duty crew member saw the fire, raised the alarm and extinguished it immediately using a portable fire extinguisher.

The onboard investigation concluded that the cause of the fire was an overheated electrical power surge protection unit that had been fitted by the ferry owners to help prevent screen failures.

It also established that some components in the passenger information system electrical circuits had been installed to a poor standard and that a 100 volt transformer for an external speaker amplifier was coated with a thick layer of dust and grime and had also overheated.

The ferry owner’s investigation identified that the surge protection units were unnecessary as the vessel’s electrical systems were already protected with circuit breakers and the information screens had individual protection fuses.

As a precaution, the owners removed the surge protection units and replaced the 100 volt transformers on all their ferries.

Lessons learned

  1. Always ensure that any additional electrical equipment you intend to fit to an existing circuit is required, compatible, installed to a high standard, and in such a way as to facilitate regular inspection and maintenance.
  2. Regular inspection and cleaning of transformers should be built into the ship’s planned maintenance schedule. Dust accumulation can prevent air circulation and eventually result in the breakdown of insulation. Tis is exacerbated by any moisture present and can lead to overheating and fire.

See also: Do’s and Don’ts for fire safety on ferries

Source link

Leave A Reply

Your email address will not be published. Required fields are marked *